LBXH2500P Insulating glass machine

Description

This production line is under PLC control. The Rinsing Station, Assembly Station and Pressing Robot adopts digital input control system, which contributes to the easy and humane automatic operation. This production line adopts touch screen with human-machine interface, and it is free and easy to switch between manual and automatic modes. It has the oneoperation display function and shows accurately the equipmentsâï¿&frac*2;ï¿&frac*2; working condition and possible malfunction, which bring much convenience to servicing and maintenance. It can automatically identify the film layer of both the coated glass from low-e glass. The main structure of Rinsing Station is of bending and welding fabrication of industrial stainless steel plates. The Rinsing Station adopts intermittent operation energy-conservation mode which can rinse coated and LOW-E glass. The brushes automatically segregate during rinsing coated or Low-E glass. It can alarm automatically and stop conveying if the film layer is not in conformity with the settings. The rinsing sector adopts oil-free water-resistant bearings which eliminates the possibility of the oil molecular floating in air during the glass past the high pressure wind drying zone and avoids water-borne stains. The spraying system with original design can adjust the spraying angle freely. It is easy and convenient to maintain and servicing. The water tank of Rinsing Station is equipped with water-heat system which is recommended to be put in use under 7Ã�ºC. The blower draws air from outside and the air circulates inside which ensure the cleanness of air. It is optimally designed to retain high wind pressure with low power of *1KW. The air volume and pressure makes sure of the total dryness of glass. It has wind-heating system which is recommended to put in use under 7Ã�ºC. Water spraying and drying zone adopts roller conveying system which avoids the scratches and crushing stains on surface of coated or LOW-E glass.