Henan Flourishing Machinery Company

Rebar cutting machine GQ40/50 can be used efficiently to cut plain carbon steel, hot-rolled steel, screw bar,

220V; single phase ;2KW; Length of steel wire rope :20M; diameter of steel wire rope :6mm; Max lifting capa

saw diameter:500mm; Cutting depth: 140mm; power :7.5kw; voltage:380V(optional); dimension:900�530&

saw diameter:500mm; max cutting depth:180mm; power :15HP; speed of saw :36-45m/s; weight :270kg; dimensio

machine body:steel; cutting diameter :32mm(reinforcing bar);Cutting Frequency: 32times/min;Motor:3kw(cooper wi

cutting Bar Diameter: 50mm(plain carbon round bar) ;Cutting Frequency: 28r/min;Motor Spec: Power:4KW Voltage:

Length of steel wire rope :30meters (could be added); diameter of steel wire rope :8mm; rated capacity:300kg

Length of steel wire rope :30meters ; diameter of steel wire rope :6mm; Max lifting capacity:700KG; Note :f

applied to compact bituminous pavement, side pavement, bridge, parking lot, playground, etc. It is the ideal

applied to compact bituminous pavement, side pavement, bridge, parking lot, playground, etc. It is the ideal

Vibrating frequency: 480HZ; Vibrating Range:3.0mm; Force:16kn; Walk speed :6-16m/min; Climbing degree :20;

Capacity (pulling force):2 ton;Steel cable Diameter( mm): 6*19-12.5;Rated speed of Steel cable:25m/min;Drum di

Rebar diameter: 14-40mm ; Motor: 4KW ; Electricity: Three ; Phase: 380V 50Hz ; Main shaft speed: 40-62r/mi

disc diamter:900mm; rotation speed of disc:60-100r/min; blade quantity:4pcs; power of gasoline engine:5.5-6

coupler diameter:14mm, 16mm, 18mm, 22m, 25mm, 28mm, 32mm, 36mm, 40mm;Material:45# quality carbon structural st

Price: USD800/pc FOB Qingdao; Asphalt Groove Cutter 500D Saw diameter:500mm; Max cutting depth:180mm; Powe

Price: USD770; Asphalt Groove Cutter 500D Saw diameter:500mm; Max cutting depth:180mm; Power of gas engine

model: 500B; Voltage: 380V; power :7.5KW; speed of main shaft :1700r/min; saw diameter : 500mm; speed o

Price: USD780; Asphalt Groove Cutter QX500C; Saw diameter:500mm; Max cutting depth:180mm; Power of gas e

saw spec :500*50*4 mm;max depth of cutting:180mm;saw rotating speed: 44 m/min;Motor Power: 7.5KW/380V/50HZ/3ph

Max. cutting diameter: 50mm(plain carbon round bar), 42mm(Reinforced Bar II); Max. Spec of Flat Bar: 85mm* 16

Max. cutting diameter: 50mm(plain carbon round bar), 42mm(Reinforced Bar II); Max. Spec of Flat Bar: 85mm* 16m

Vibration Force :30KN; Frequency: 62Hz; Forward speed:15m/min;Impact Depth :30cm; Power : 4kw; Climb : 25%; No

motor power: 4kw working plate diameter:400mm; working speed:8r/min; plain carbon round bar bending:50mm;

Cutting bardiameter: 42mm; cutting frequency: �32 times/min' Motor:Power:3KW, Voltage:38

concrete mixer JZC350C; Motor :3kw, 380v, 1440r/min Double gear on drum, double new bears, using wormgear c

Bender capacity(plain carbon steel diameter): 40mm; (reinforced steel diameter): 32mm; Rotating speed of main

straightening diameter:5-12mm; straightening speed:30m/min; motor:5.5kw, 380V, 3phase, 50hz; mainly straigh

bending stirrup diameter:20mm;bending rebar diameter:16mm;speed:30times/min;motor:1.5kw; voltage could be cust

Gearbox , gear , shaft, blade , disc

operate by footpadal or button;high speed ;high quality; pre-set angle degree by limit switch, adjust angel de

gearbox: curve gearz(1:20); disc diameter:900mm ; rotation speed:120r/min; gas engine power:5.5-6.5HP; wei

disc diamter:900mm; rotation speed of disc:60-100r/min; blade quantity:4pcs; power of gasoline engine:5.5-6

1:straightening diameter:4-14mm 2:straightening speed:35-42m/min(spped could be adjusted) 3:length of cutt

bender capacity(plain carbon steel diameter):50mm, bender capacity(reinforced steel diameter):42mm, rotati

cutting depth:175mm; diesel engine:7kw; diesel engine speed: 2200r/min; saw diameter:500mm; water tank:55

Motor: 3kw, 1440r/min, 380V(motor voltage could be changed); Lift capacity :350kg; Rotation degree: 360; Ma

three model . straighten diameter:5-12mm, 10-18mm, 12-20mm . mainly used to straighten scrap bar .

capacity:2 ton; max steel rope length:150m, 6*19-12.5 ; speed:25m/min; motor:15kw, 1440r/min; magnet brake

max lift capacity 1000kg; motor:3kw ; max lifting height:20m(could be changed); lift speed : 7m/min; lengt