GT 025

Product Description

This door panel is made from Iron with the state of the art designs.

• Universal Standard / Heavy Weight Hinge: Hinge fillers are used allowing for an easy modification from standard to heavy weight hinge preparations.
• Edge Seam Construction: Visible seam (Optional continuously welded seamless or intermittently welded seamless except in *0 gage)
• Thickness: 1 3/4 inch (1 3/8 inch available ins 6 Panel only)
• Actual Door Size: Door undersized from nominal by 1/4 inch width and 7/8 inch height. Standard undercut is 3/4 inch.
• Hinge Rail and Reinforcement: Hinge edge is non-beveled and reinforced with a continuous *6 gage steel channel (optional *0 gage) projection welded at a maximum 5 inches on center. Additional reinforcement plates are provided at the hinge location to give a total of 3/*6 inch reinforcement (Backset 1/4 inch).
• Lock Rail: Lock edge is non-beveled and reinforced with a continuous *6 gage steel channel projection welded at a maximum 5 inches on center. *6 gage reinforcements for mortise or cylindrical locks are of an integral type in accordance with ANSI A**5 standards. Optional *4 gage in DE Series. Optional beveled 1/8 inch in 2 inches
• Top Channel: Top channel is a flush *6 gage steel channel, projection welded at a maximum 2 1/2 inches on center.
• Bottom Channel: Bottom Channel is inverted *6 gage steel channel, projection welded at a maximum 2 1/2 inches on center