Waterproof Contactless Card Reader YET-U1

Product Description

Specification

·        Wiegand *6bits/ Wiegand*4bits /ABA/RS**5/RS**2 Standard Format Data Output

·        Less than 0.2 second Response Speed

·        Less than 0.5 seconds Proximity Time Distance

·        ***5cm Proximity Range

·        Support UEM ***0 ID Card or compatible with it( *4bits, Manchester Code) and MF 1 Card (*3.*6 MHz Frequency)

·        **5 to *5 Ambient Temperature,*0%**0% Ambient Humidity

·        Built-in Antenna

·        Built-in LED (Double Color LED)

·        Built-in Loud Speaker (Buzzer)

·        DC *2V Working Voltage,*0mA Working Current

·        **0 Meters Communication Distance

·        Real Time Data Transfer

·        Black or White color

·        PVC Case Material (Black Resin for Water-Proof Function)

·        **0**0**0(mm)

Installation

Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.

Wire Connection

Red        DC 5V**6V

Black       GND

Blue         D1

White        D0

Brown        BEEP

Green        LED

Yellow       Alarm

Notice

1. Confirm the electric voltage (DC*2V) and differentiate positive anode and cathode of power supply

2. When external Power is used, make sure sharing the power with Controller Box or using the same GND

3. When the distance between card reader and controller is more than *0m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires.