Tire Oil Pyrolysis Production Line

Product Description

Characteristics of our pyrolysis production line

1.   Reactor

Our reactor is made by high quality boiler steel plate or the even better **4 stainless steel plate according to your demand.The thickness is between *2mm to *6mm.The reactor is bent into perfect circle which will make sure that the reactor can turn very smoothly without any vibration.All the welding job will be finished by the automatic welding machine and all the pieces of the reactor should be welded from inside and outside to make sure there is no leaking point on the reactor body.If you have higher requirements,we even can equip the reactor with internal cooling system which can make the cooling process extremely quick.We adopt special construction for the door of the reactor which can be opened or closed very easily at any position and the sealing function is also perfectly.

2.   Distilling tower

We adopt the distilling tower construction to remove the dust from the oil vapor.Our distilling tower can remove the dust from the oil vapor with high efficiency meanwhile,it is heated by the heat-transfer oil to keep the temperature inside the tower just above the liquefaction point of the oil vapor so that there will be no oil vapor turn into liquid inside the distilling tower.All the oil vapor will go to the major condenser to transform into liquid oil.We cover the inside surface of the distilling tower with special material to make it smooth like mirror so that there will be no greasy filth sticking to the surface.

3.   Major condenser

Our engineers calculate precisely for the heat-interchanging area to make sure it is just perfectly adequate for turning the oil vapor into liquid oil but not make the oil too cold which is not good for the quality of the oil.All the cooling pipes inside the condenser are made of high quality seamless steel pipe so that it guarantees that the pipes will never have leaking point during its long serving-time.We also adopt the vertical construction for the condenser which is good for the cooling process and space-saving purpose.With the vertical construction,the condenser will not be blocked up by the oil filth.

4.   High efficient furnace

We developed our own furnace construction which has both high efficient heating capacity and cooling efficiency.With our furnace,you can get the oil from the rubber just within two and half hours since you start to heat the reactor and you also can cool down the reactor below **0 degrees within only four and half hours.All the figures are from our practical production process.Our furnace will not heat the reactor directly which means the flame will never touch the steel plate of the reactor.In this way,the reactor will have a longer service life span.Meanwhile,it will heat the reactor perfectly symmetrically so the rubber inside the reactor will turn into oil vapor very well.With our furnace,each circle will just need less than *4 hours.