Product Description
Stainless steel bolted water
tank "ICEBERG"
This type of reservoirs is made using South-Korean technology,
which was honed with the assistance of our specialists. At our
Russian enterprise this type of tanks is produced from ***6.
Technology consists in jointing stainless steel panels between
themselves using bolts. Strengthening structural elements provide
additional inflexibility and resistance to any unfavourable
conditions of environment whether earthquakes, high wind or snow
loads. This allows to use such water tanks almost in any part of
the world. All environmental factors of each specific region are
taken into account during designing.
But the main distinctive features of these reservoirs are
the follows:
- structure is designed in such way that complete
watertightness of the tank is provided without using polimeric
liners;
- unique design of sealing gasket, due to which stored in the
tank product doesn't contact with a gasket, only with stainless
steel
- excluding supporting frame and external strengthening angle
bars, all external and internal elements of reservoir are made of
stainless steel, including whole reservoir's body, ladders,
branch pipies, hatches, manholes, internal pillars, ridgepoles
and external sheathing.
Considering unique corrosion-resistant properties of stainless
steel, it's low adhesion and absence of chemical interaction with
contacting liquid, construction of Iceberg water tanks
provides not only stunning durability, but also unsurpassed
hygiene, that allows to use such reservoirs in scopes with
the highest requirements and sanitary-hygienic standards. No wonder
why surgical instruments are made of stainless steel. That's why
often this type of water tanks is used for potable water
storage.
Besides potable water, reservoirs Iceberg are also used as fire
tanks, as tanks for foamer, for storage of low-aggressive liquids,
dilute acids, alkalis, edible and technical oils, bulk
products.
Using of stainless steel also allows to avoid large expences for
future service and maintanance, including costly cleanings,
examinations, paintings, coating restorations, anticorrosion
treatments and so on.
Stainless steel water tanks Iceberg are produced of two
types:
1. Cylindrical;
2. Rectangular.
Cylindrical water tanks are produced with a
capacity from 5 to *0,**0 cbm (1,**0 7,**0,**0 gallons). We have
standard sizes of typical water tanks, but according to the
customer's enquiry we produce sectional reservoirs of nonstandard
sizes. Design can be made using thermal insulation or without
it.
Rectangular water tanks are produces with a
capacity from 0.5 to 5,**0 cbm (****1,**0,**0 gallons) and are made
by individual order. Design also can be made using thermal
insulation or without it. Frequently this type of tanks is
installed indoors, design allows to produce reservoirs of any
shapes taking into account specificities of the room. We have
produced L-shape and U-shape water tanks when there was need to go
round building columns or corners.
Additional information and
options:
For producing of our reservoirs we use only high-quality materials,
each consignment of materials is being tested in the lab for
compliance with requirements and standards. According to the scope,
agressiveness of stored liquids or by customer's order we use
stainless steel of different grade
(AISI **4, **6, **0,
etc.).
All water tanks are installed on concrete base. In most cases we
produce reservoirs on support frame, that allows to place drainage
branch pipe in the lowest point, such placement provides complete
effortless drain of stored liquid without leaving a residue, so it
facilitates a lot exploitation of water tank and it's maintanance.
But according to the project or by customer's wish we also produce
water tanks without support frame, such tanks are installed
directly on the concrete base.
Water tanks can be equipped with additional technological
elements or equipment, such as roof fence, railings,
ladder cages, heating systems, coils, absorber filters for
purifiying of incoming into the reservoir air, control-measuring
instrumentations and automatics, and so on.
Due to the thermal insulation and heating systems installing, our
water tanks can be exploited almost at any unfavourable climate
conditions.
For purifiying of the air, which comes into the tank during it's
filling or discharge, installation of special filtering systems
(absorber filters) is possible. Such filters purify incoming air
not just of all types of mechanical contaminants, but also of
chemical and bacterial.
When the tank is assembled, hydravlic test are being implemented,
passport of tank is signed and warranty comes into an effect.
| Country: |
Russia |
| Model No: |
Iceberg
|
| FOB Price: |
(Negotiable)
Get Latest Price
|
| Place of Origin: |
- |
| Price for Minimum Order: |
- |
| Minimum Order Quantity: |
1 Piece |
| Packaging Detail: |
wooden boxes, can be delivered by average tented vehicle or in standard container |
| Delivery Time: |
short terms |
| Supplying Ability: |
4 Piece per Month |
| Payment Type: |
T/T, L/C, Other |
| Product Group : |
Water tank
|
