Soft package winding machine

Product Description

Application:

GA**4SF Soft winding machine can winding pure cotton yarn, chemical-fiber and blended yarns on cones, its for preparing winding before dyeing.

Main technical data:

*Type: Double sides(Groove Drum)

*Number of spindles: *0, *0, *0, **0 ,**0 (**0 as the standard spindle number)

*Spindle Gauge: **4mm

*Guide Traverse: **2mm

*Winding speed: ******0 meters/minute

*Grooved drum: Bakelite grooved drum of φ*0mm with 2 circles of the same distance.

*Drum guide travel: **7mm

*Grooved Drum transverse: 2.2mm , 3.2mm, two types.

*Traversing times of grooved drum: *4.2 times/minute.

*Bobbin: 0°, 3° *0′ , 4° *0′or can be make-to-order against offered sample bobbin.

*Take up size: Φ**0 (big Dia) ×**9mm (length)

*Density of cheese yarn on cones: 0.***0.*0g/cm3

*Yarn-break auto-stop device: Each spindle has an independent set of auto-stop device.

*Tension device: Tension balancing device is set with total *0 kinds of tension spacers (weight balancing can be carried out according to technical requirements).

*Yarn cleaning device: installed Blade for Yarn cleaning.

*Diameter of Drums belt pulley: Φ**0mm

*Blank-bobbin conveyer device: It is equipped at the left and right side of the machine, and its used to convey blank bobbins from the head to the rear.

*Hold yarn shelf: can use Cylinder bobbin, Conical Cone and etc.

*Anti-Ribboning device: it has a intermittent switch in the Electronic box to make the motor rotating turning on and off circularly.

*Traversing gear: it installed grooved-drum traversing gear to remove the hard edges of the cone.

*Waste yarn Cleaning device: it can optional to install GUO*3A type to-and-fro blowing cleanser on the machine.

*Machine size: L****5 x W***2 x H***5mm (its **0 spindles size ).

*Motor Specification: Main Motor, JF***2A*4, 1.8Kw, **0V, and ***0 RPM, 2 sets.

Auxiliary Motor, FW*1A*6, 0.*7Kw, **0V, and **0 RPM, 1 set.

*Triangle belt: A***0, 6 pieces

The machine can optional install Electric Cleaner, Length counting device per spindle, time counting device, Frequency Inverter Controller, Air Splicer and etc.