seat heaters

Product Description

Distintic features: Smocking carbon fiber: One-time smocking to form pattern of carbon fiber in the max. size of **0×***** matchless characteristics is no wrinkles on the surface, unanimous power density, and hence providing even heating Amount of carbon fiber used: Amount of carbon fiber used: ≥ *5m. The stitch: 1mm (0.*9inch) to 1.5mm (0.*9inch) Providing heating more evenly Double-coated adhesive tape: The advanced special glue equipment is used. There are *0mm of both edges of the backing uncoated adhesive, so that the backing is easily ripped open and installation time is shorten. Electrode tape: 7 to *1 strands metal wires electroplated with silver, the connection with wires ***** width of the tape: *6mm(0.**4in) to *8mm (0.**9in.); The thickness of electroplated silver layer: 5μm; The metal wires are taken anti-oxidation process, the life time is increased, and the heating power will not be attenuated in the long run. Press-fit technology: Special copper-belt equipments are used Adhesive glue: Special high/low temperature resistant glue is used; Special equipments are used to glue; Conformance with automobile industry QC/T**3 standard Sleeves of conductors: PET monofilament is first time applied to the seat heaters; The wear and bending resistance of the wires are increased. Special equipment is used to weave main connection wires by specialized plant Connection terminal and housing: AMP series products Thin film pressure sensor of human body: Owns autonomous intellectual property right;All products can be installed with such function 5 dials heating switches built-in electrical control with autonomous intellectual property *****:protections for short circuit/broken circuit/over voltage and 5 to *0 seconds postpone after triggering heating, in order to make electric motor starter work properly Specifications: Working voltage: *0.***5V or ****8V Working current: 1.*- 2.5A single pad