mass flow meter

Main Features

1. Measuring fluid flow rate directly (It is significant to the energy measurement and chemical reaction during the producing detection)

2. High Measurement accuracy: (0.1%*0.5%)

3. Wide Application (Besides general fluid measurement, other industrial medium which is hard to be measured by general flow meters also can be measured, such as Non-Newtonian fluid and Slurries etc.)

4. Low Installation Requirement: (there is no requirement for straight pipe upstream or downstream) Reliability, low maintenance rate.

Application

The mass flow meter can be used in the following fields to meet the requirements of ingredient, mixing processes and commercial measurement.

Chemical: containing chemical reaction system

Petroleum:  moisture content analysis

Lipids: including vegetable oils, animal fats and other oils

Pharmaceutical

Painting

Paper making

Textile printing and dyeing

Fuel: crude oil, heavy oil, coal slurry, lubricant and other fuels.

Food: gas dissolving beverage, health drink and other liquid.

Transportation: pipeline liquid measurement.

Sensor Technical Parameter

1. Dimension and Measuring Range

2. Accuracy (Liquid) :( With FT*1, FT*2 Converter):

Accuracy of fluid measurement: ±0.**0.5%

Repeatability: ±0.**0.*5% 

3. Density (Liquid) measuring range and accuracy (With FT*1, FT*2 series converter)

Range: 0.**2g/cm³    Accuracy: ±0.**2g/cm³

4. Temperature measuring range and accuracy (With FT*1, FT*2 converter):

Temperature measuring range: *******0°C   Accuracy: ±1°C

5.Working temperature of measured medium: -*0°C***0°C

6.Ambient temperature: -*0°C**0°C

7. Material: The measuring tube **6L  Housing: **4 

8. Working pressure: **4.0MPa

9.Explosion-proof level : Exd (ia) ⅡC T6GB

Transmitter Technical Parameter

1. 1.     FT**-series Wall Mounting

FT**-series converter is a kind of wall mounting signal converters. It consists of MPU panel, signal adjustment board, safe grid, power panel, LCD displayer and keyboard, shell etc.

Converter offers vibration driving signal of the measuring vibration pipe, and detects the sensor signal changing with the flow. It also can display the flow data and output standard connection signal. The converter can display: mass flow, mass gross, volume flow, total volume, density, temperature, etc.

Technical Parameters

l        Power supply: **0VAC±*0%  *0Hz or *4V DC±5%         

Power: ≤*8W

l        Working condition:

Temperature:**0°C~*5°C

Relative humidity: ≤*5%(noncondensable)

No corrosive and flammable gas

l        Protection Grade: IP*5

l        Instrument display: instantaneous flow, accumulate flow, density, temperature

l        Output signal: 0~*0KHz pulse signal. Accuracy: 0.*5%

                4~*0mADC current signal, Accuracy: 0.*5%

RS**5 communication output signal

l        The dimension: **1x**3x*2

1. 2.     FT*2 Series on-site Type

FT*2 series converter is a kind of a site-type signal converter instrument. It consists of basic converter and display unit. It should be installed inside of the housing with the function of explosion-proof. Besides, FT*2 series converter is used together with Coriolis mass flow meter on site. It has the function of sensor vibration pipe driver, phase signal detection, flow operation displayer, flow accumulation, long-distance signal output and so on, should always be mounted with the Coriolis flow meter sensor on site.

Technical Parameters

l        Power supply: *4V DC±5% (**0V AC±*0% *0Hz)

Power: ≤7W

l        Ambient temperature:**0°C~*0°C

l        Relative humidity: ≤*5%

l        Explosion-proof: EX d(ia)IICT6Gb

l        Protection grade: IP*7

l        Instrument display: instantaneous flow, accumulate flow, density

l        Output signal:  0~5KHz  0~8KHz  0~*0KHz  pulse signal. Accuracy: 0.*5%

                 4~*0mA DC current signal, Accuracy: 0.1%

RS**5 communication output signal

l      The dimension: Φ**5xH**0  Electrical interface: M*0x1.5