liquid silicone cold runner injection mold for baby nipples

Product Description

1. Standard or special nozzle spacings permit the usage of a "CRS" with several cavity plates for molding of different parts. 

2. Rapid clamping elements for fast, simple changing of cavity plates. 

3. Production of molded parts with no sprue or runner is possible by precisely defined thermal separation between the "CRS" and the heated cavity plate. 

4. Reduced gate vestige is achieved by the shut-off type valve gated system insuring optimum quality molded parts. 

5. A valve gate system is able to perform at high temperatures without cross linking "LSR' material in the gate area. 

6. Shorter cycle times are possible since the cavity plate can be operated at higher temperatures. This is particularly advantageous for large or thick wall parts. 

7. Optimum balancing of multi-drop systems is achieved by regulating the material flow to each cavity by the use of interegral chokes, or flow regulators at each nozzle. 

8. Minimum mechanical shear is exerted on the "LSR" material due to the larger gates possible with our valve gates system. 

9. The single drop "CRS" nozzles are financially advantageous for prototype or     short run projects.