GlobeCore High vacuum transformer oil degassing plant CMM-4/7D

Product Description

 High Vacuum Transformer Oil Purification Plant model CMM *4/7D purifies insulating oils of mechanical particles and employs thermal vacuum for water and gas removal. Operate the Unit when assembling, servicing and exploiting oil filled equipment (power transformers, high voltage switches, etc.) up to ***0 kV of voltage.  Performance in a single pass through the purifier at a full flow rate shall be as follows: Water Removal: From **0 ppm down to less than *0 ppm as measured by ASTM method D****3. Gas Removal:From fully saturated with air (*0 to *2% by volume) down to less than 0.*5% by volume as measured by the ASTM Method D****5 Particulate Matter Removal: *8% of particles over 2 μm Dielectric Strength: Improvement in dielectric strength up to *0 kV. TECHNICAL DATA Parameter Value 1. Capacity, m3h, - in degassing, dehydration and filtration mode 0 - 4.0 - in heating and filtration mode up to 7.0 2. Capacity adjustment range, m3h **4.0 3.PedroGil RVB *0.*0 Roots vacuum pump capacity, m3h **0 4.* Processed oil parameters : - maximum gas content, %, max. 0.1 - maximum moisture content, ppm, 5 - ISO ***6 industrial purity class 9 - mechanical impurities content, ppm, max 8 - filtration rating, micron 2…*5 -breakdown voltage, kV, minimum *0 5. Maximum oil outlet temperature in heating mode , º¡ *5 6. Filtration coefficient >*0 7. Outlet pressure, MPa 0.*5 8. Delivery head, m *5 9. Oil heater power, kW *0 *0. Oil heater mean power, Wcm2, max 1.1 *1. Maximum power consumption, kW, max. *3 *2. Power supply parameters, 3 Phases + Neutral grounded - voltage, V as required - AC frequency, Hz ***0 3. Dimensions wo trailer, max., mm - length ***5 - width ***0 - height ***0 *4. Weight, kg, max. **0 Note - * For inlet oil parameters as follows: - gas content by volume less than *0,5% - moisture content by weight less than 0,*1% (**0 ppm) - temperature above 5 º¡.