Girth Weld Closure Heat Shrinkable Sleeve

Product Description

~Radiation Cross Linked Wraparound PE Heat Shrinkable Sleeve HSS For 3PE Oil And Gas Pipe Girth Weld Straight Joint Field Coating
                                INTRODUCTION
PE heat shrinkable tape (sleeve) is composed of cross-linked polyethylene back and special heat melt adhesive. Heat melt adhesive has good bonding with PE back, steel pipe and Fusion bonded epoxy (FBE layer). By heating PE back shrinks, adhesive layer melts, and closely wraps around pipe joints, then it forms together with FBE a firm and continuous anti-corrosion body. It is resistant to corrosion, wear, impact, UV and aging, easier to be operated.
 
Wraparound products
Application area:
It is mainly used for wrapping around pipe, anti-corrosion of kinds of pipe joints, and repairing pipes.
For example: Oil and gas pipe, PU insulation pipe, 3PE/2PE steel pipe.
 
 
 
                           CONSTRUCTION CASE
Heat shrinkable sleeve for Oil & Gas Pipe

Heat shrinkable sleeve forThermo Insulated Pipe

COMPARISIONS

                                TECHNICAL PARAMETERS

NO Text Item Unit Performance Text Result Text Metho
Back Material
1 Tensile Strengt MPa ≥*7 *9.*7 ASTM D**8
2 Elongatio % ≥**0 **6 ASTM D**8
3 Vicat Softening Poin ºC ≥*0 *2 ASTM D***5
4 Brittleness Temperatur ºC <**5 <**5 ASTM D***1C
5 Dielectric Strengt MV/m ≥*5 *3.*3 ASTM D**9
6 Volume Resistivit Ω.m ≥1****3 1.1****3 ASTM D**7
7 Environment Stress Crac h ≥***0 >***0 GB/T***2
 
 
8 
Chemical
resistance
(7d *0%
HCI Tensile strength MPa ≥*5 **4.9 ASTM D**8
Elongation  % ≥*5 *6.3 ASTM D**8
*0%
NaAH Tensile strength MPa ≥*5 **2.1 ASTM D**8
Elongation % ≥*5 *5.6 ASTM D**8
*0%
NaCL Tensile strength MPa ≥*5 **8.3 ASTM D**8
Elongation % ≥*5 *4.1 ASTM D**8
9 Thermal aging
(**0ºC,**8h Tensile strength MPa ≥*4 *0.7 ASTM D**8
Elongation % ≥**0 **0 ASTM D**8

NO. Text Ite Uni Performanc Text Resul Text Metho
Adhesive
1 Softening Poin ºC ≥*0 *0.1 ASTM E*8
2 Brittleness Temperatur ºC <**5 <**5 ASTM D***1C
3 Lap Shea MPa ≥1.0 1.5 ASTM D***2
 
4 Peel Strength
(*3±2ºC Steel N/cm ≥*0 **5.6 ASTM D***0
Primer N/cm ≥*0 **5.9 ASTM D***0
PE laye N/cm ≥*0 **0.0 ASTM D***0
Non-solvent Epoxy Primer
5 Shear of cured primer MPa ≥5.0 *2 SY/T***1

We are also producing machine of heat shrinkable sleeve, You are welcom to ask for more information.