fiberglass chopped strand mat

Product Description

Product introduction

Fiberglass Chopped Strand Mat is an non-woven E- or C-glass fiberglass fabric manufactured by spreading continuous filament rovings of *0mm in length randomly and uniformly in combination with polyester binder in power form (or other binder in emulsion form).

Characteristic and appliance

Chopped Strand Mat is characterized by good combination of resin, easy operation, good wet strength retention, good laminate transparency and low cost.  It is suitable for the application by hand lay-up FRP moldings, such as, various sheets and panels, boat hulls, boat tubs, cooling towers, corrosion resistant, vehicles, etc.

Technical date

Glass type: E-glass and C-glass Chopped Strand Mat.
Bond type: Powder or Emulsion.
Density: *0g/m****0g/m2.
Normal types: **0g/m2. **5g/m2. **0g/m2 **0g/m2. **0m2.
Bond Content: **0g/m2 (*0%**5%). **0g/m2.**0g/m2.**0g/m2 (4%*6%)
Roll Width: **0mm****0mm.
Normal types: **0mm.***0mm.***0mm.***0mm.***0mm.
Roll weight/: *8kgs**5kgs.
Normal types :*8kgs.*0kgs.*5kgs

Package

Product is manufacture in form of a roll warp on a paper tube then after packed in a plastic bag and placed with in a cardboard

Carton. Rolls can be loaded in a container directly or on pallets.

Deposited

Chopped strand mat should be stored in dry, cool, clean and rainproof area. Recommended temperature rang of storage is between ****0 and relative humidity between *0%**0%.