current operated switch current induction switch 16K-SD/SP-NO-F/AL

Product Description

Handbook of Application

Current Switches

The Series are intended to monitor the operating status of fans, pumps, and motors. These self-powered switches can be hung or tied directly to cables or wires. For use on existing installation, split core models can be installed without disconnecting cables. LED indicators provide a visual confirmation that the current is passing through the core. Both fixed and adjustable set points are available. The adjustable models easily adjust the set point with a potentiometer.

Operating Instructions

The Series of Current Switches offer an to equipment under normal operating conditions. Where failure or malfunction of the current switch could result in personal injury or property damage to the controlled equipment or other property, additional precautions, must be designed into the control system. Incorporate and maintain other devices such as supervisory or alarm systems or safety or limit controls intended to warn of , or protect against, failure or malfunction of the Series.

Risk of Shock

Disconnect power supply before making electrical connections. Contact with components carrying hazardous voltage can cause electrical shock and may result in severe personal injury or death.

Installation

Mounting

1. Ensure that the power supply to the circuit is off.
2. For solid core devices: disconnect the circuit line, slide the power conductor cable through the sensing hole of the current switch, and reconnect the circuit line.

For split core devices: open the core using the release tab. Snap the core closed around the power conductor cable. Make sure that the core release tab is locked in its original position.

1. Connect the switch circuit to the two screw terminals using ring or fork type terminals.
2. Turn circuit back on.

Specifications

Amperage Range: 0~**0A AC

Maximum Switch Rating:

   For fixed set point models:

   For adjustable set point models: 1A