12-24V 2.4G 4 Zone Touch Plastic Shell RGB LED Controller Common Anade RGB Remote Controller For LED Light Strip12-24V 2.4G 4zone

Product Description

1. Product Description
With the technology of the 2.4G high frequency wireless remote control, it has the characteristics of low power consumption, long distance transmission, and strong anti-interference ability, high speed telecommunications, etc. The remote looks fashionable and elegant, with simple and practical functions of color changing and brightness dimming, the capactive touch screen design makes the remote easy to use.
 
2. Technical Data
Supply Voltage：DC****4V
Output：3 CMOS Open drain Output
Connection mode：common anode
Static power consumption ：<1W
Output Current：<6A/CH
Output Power：*2V:<**6W, *4V:<**2W
RF Frequency：2.4G
3. Program List
Programs:
Program 1(Fade in and Fade out)
Here different colors fade into each other.
Program 2(Strobe White)
Just white color flashes up.
Program 3(RGBW Fade In Fade Out)
This program fades in and fades out the color red, green, blue and white one after another.
Program 4(Color Flash)
In this program, red, green, blue, white yellow purple flashes to change
Program 5(Red Color Ramp up and Flash)
In this program, red color brightens from 0%***0% and shuts down, then flashes three times
Program 6(Green Color Ramp up and Flash)
In this program, green color brightens from 0%***0% and shuts down, then flashes three times
Program 7(Blue Color Ramp up and Flash)
In this program, blue color brightens from 0%***0% and shuts down, then flashes three times
Program 8(Color Change+Flash)
Here several colors fade into each other and then flash randomly
TIPS
To dim all RGBW lights at once or change the color, first press Master ON. To do this with individual lights, first press Zone ON. Secondly, choose the color or brightness according to the color ring or brightness ring.
 
For RGB led strip light, the white is mixed from Red, Green and Blue, so the white is not pure.
For RGBW led strip light, the white is pure white.
 
Linking new lights to the remote controls:
 
1. Choose which zone you want to assign the light( 1 to 4)
2. Switch off the main power supply of the light in the selected zone with the main switch or pull the plug from the socket.
3. Now switch on the light again and within 3 seconds press one of the Zone ON s one time on the remote control.
4. When this link operation is successful, the light slows blinks 3 times on and off.
 
Unlinking the lights:
 
1. Check via the remote control to see which zone( 1 to 4) is already linked to a light.
2. Switch off the main power supply of the light with the main switch or pull the plug from the socket.
3.  switch on the light again and within 3 seconds press one of the Zone ON s one time on the remote control.
4. When this unlink operation is successful, the light quickly blinks 9 times on and off.
 
Grouping of several lights.
You can add an endless numbers of lights to a zone on the 4 channel remote by linking the lights to different zones, This way you can completely flexible in creating different group combinations. Below you can see some grouping examples.
 
We recommend using rechargeable batteries for the remote controls
For that reason, we dont include ordinary batteries, We hope you appreciated our environmental friendly choices and they do not cause you any inconvenience.